How To Adjust Cabinet Hinges?

Table of Contents

Adjusting cabinet hinges is a common maintenance task that homeowners may encounter. Over time, cabinet doors can become misaligned due to wear and tear, or due to changes in temperature and humidity. Fortunately, adjusting cabinet hinges is a simple process that can be done with just a few tools and a little patience. In this essay, We will discuss how to adjust cabinet hinges?

Adjust cabinet hinges

Gather Tools

To adjust cabinet hinges, you will need a few basic tools. These include a screwdriver, a drill (if you need to make new holes for the hinges), and a level. You may also need shims (thin pieces of wood or plastic) to adjust the position of the hinges.

Before you can make any adjustments, you need to identify the problem with your cabinet door. Common issues include doors that do not close properly, doors that are crooked or uneven, or doors that rub against the frame when opened or closed. Once you have identified the problem, you can move on to the next step.

Adjust the Hinges

Adjust the Hinges

To adjust the hinges, you will need to loosen the screws that hold them in place. Depending on the type of hinge you have, you may need to use a screwdriver, an Allen wrench, or a drill to do this. Once the screws are loose, you can adjust the position of the hinges by moving them up or down, or side to side. If the door is not level, you may need to use shims to adjust the position of the hinge.

Test the Door

Test the Door

Once you have made the necessary adjustments, it’s important to test the door to make sure it is properly aligned. Open and close the door to see if it rubs against the frame or if there are any gaps between the door and the frame. If necessary, make additional adjustments until the door is properly aligned.

Tighten the Screws

Tighten the Screws

Once you are satisfied with the position of the hinges, it’s time to tighten the screws. Be careful not to overtighten the screws, as this can damage the hinge or the cabinet. Use a level to ensure that the door is still level after tightening the screws.


In conclusion, adjusting cabinet hinges is a simple process that can be done with just a few basic tools. By following the steps outlined in this essay, you can ensure that your cabinet doors are properly aligned and functioning as they should be.


In cabinet hinges, an overlay refers to the amount that the cabinet door covers or overlaps the cabinet frame when it is closed.

  1. Full overlay: The cabinet door completely covers the cabinet frame, leaving little or no visible frame when the door is closed.
  2. Half overlay: The cabinet door covers half of the cabinet frame, leaving a visible frame when the door is closed.
  3. Inset overlay: The cabinet door is flush with the cabinet frame, and the edge of the door sits inside the frame.

Overlay measurement: This refers to the distance the cabinet door covers the cabinet frame when it is closed. To measure the overlay, you need to measure the distance between the edge of the cabinet door and the edge of the cabinet frame. Most hinges come in overlays of 1/2 inch, 3/4 inch, and 1-1/4 inch.

Contact Us Now

Maybe you…

Need a Quote? Have question

Looking for more information about furniture? Contact us today.

Share This Story, Choose Your Platform!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Send Require Now